{"product_id":"rms900106857","title":"LITHIUM-ION CHARGING SYSTEM CONVERSION (RMS900-106857)","description":"\u003cp\u003e\u003cstrong\u003eStator + Flywheel + Regulator (Lithium-Ion) + Gasket + Connectors Kit\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCrankcase cover gasket included\u003c\/li\u003e\r\n\u003cli\u003eConnector kit included\u003c\/li\u003e\r\n\u003cli\u003eAll products are tested\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eBrand new aftermarket stator\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDirect replacement to your original unit\u003c\/li\u003e\r\n\u003cli\u003ePlug-and-play, direct fit, easy installation\u003c\/li\u003e\r\n\u003cli\u003eHighest grade of lamination materials\u003c\/li\u003e\r\n\u003cli\u003eHighest grade of copper winding, resistant to 200 degrees Celsius\u003c\/li\u003e\r\n\u003cli\u003eConnector included\u003c\/li\u003e\r\n\u003cli\u003eRubber grommet included\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eIntroducing our newest Heavy Duty Flywheel Rotor For Yamaha Motorcycles\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eAnyone who rides or repairs a Yamaha YZF R1, FZ1 or FZ8 is probably familiar with the flywheel problems common to these models. Most of these bikes will have at least one flywheel failure in their lifetime so far. Low-quality epoxy was used on OEM flywheels to secure the magnets to the rotor body. Over time and many heat cycles, the epoxy fails allowing the magnets to come loose and contact the stator, potentially causing catastrophic damage.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eA Heavy Duty Flywheel to the rescue!\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eNew RMSTATOR heavy-duty flywheel rotor for Yamaha Motorcycles is a well-priced solution to problems with the OEM flywheel, and an excellent alternative to all the mechanical troubles you can encounter with a repair.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eBuilt to OEM size - \u003c\/strong\u003eFits precisely in your ride: install it and forget it.\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eImproved epoxy - \u003c\/strong\u003eUses high-temperature epoxy that is stronger than OEM, eliminating the possibility of magnet detachment.\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eHigh-grade steel capping - \u003c\/strong\u003ePrevents heat and friction from degrading the epoxy attaching the magnets. Though extremely unlikely, if a magnet did ever come loose, it would remain in the sleeve preventing contact with the stator.\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003ePrecise balancing - \u003c\/strong\u003eEliminates crankshaft vibrations for longer engine longevity.\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eShop with confidence - \u003c\/strong\u003eTwo years warranty. All products are tested.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eDon't waste time with temporary solutions, and start fixing your ride like a pro!\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eWhy cheap repairs won't work?\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eQuick stronger epoxy fixes do repair flywheels in the short term. It might, however, impair long term performance and reliability of your ride.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eRemaining OEM magnets: \u003c\/strong\u003eOriginal magnets remaining can still come loose at any time.\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eMagnet alignment: \u003c\/strong\u003eThe alignment of magnets around the flywheel is critical for proper stator operation. Even very fine misalignment will reduce stator efficiency significantly.\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eMagnet spacing: \u003c\/strong\u003eExcessive epoxy or incorrect magnet spacing around the flywheel can easily affect the flywheel balance. This can cause stator contact or even crankshaft damages.\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eIncorrect replacement magnets: \u003c\/strong\u003eThe magnetic field strength of new magnets MUST match the originals. Stator failure can occur quickly with stronger magnets and stator output can be decreased significantly using weaker magnets.\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eWrong epoxy properties: \u003c\/strong\u003eEpoxy that is not rated to permanently handle high temperatures can quickly cause a serious failure.\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eOil contamination: \u003c\/strong\u003eWrong epoxy for the application can also contaminate the crankcase oil, damaging the motor.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eAll these reasons make us strongly recommend that you replace your broken flywheel with our new heavy-duty flywheel.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eWhy use Mosfet Enhanced technology?\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eRuns cooler - \u003c\/strong\u003eRuns much cooler than the traditional Shunt voltage regulator rectifier.\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eSaves gas - \u003c\/strong\u003eLess load on the stator, less work, less fuel is used and you save.\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eRegulated energy - \u003c\/strong\u003eThe power charging your battery is steadier and smooth.\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eExtended battery life - \u003c\/strong\u003eExtends the battery’s life and cold cranking capacity.\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eMore engine power - \u003c\/strong\u003eRemoves stator load resulting in more engine power.\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eOptimized power - \u003c\/strong\u003eOptimize power delivery by switching the stator coils on or off.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eWith Enhance Technology design\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eThis product is an advanced design that lowers operating temperatures for extended longevity and better performance than the OEM part.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eBrand new Mosfet voltage regulator rectifier\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eWORKS WITH LITHIUM BATTERIES ONLY\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eStop burning your voltage regulator rectifier!\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eIt is time to update or replace your voltage regulator with the advanced MOSFET type.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eIt runs cooler than all SCR diode-style OEM regulators. In addition, this rectifier has overheat protection, rather than burn up it will simply turn off for a while and cool off.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDirect replacement to your original unit\u003c\/li\u003e\r\n\u003cli\u003ePlug-and-play, direct fit, easy installation\u003c\/li\u003e\r\n\u003cli\u003eThe quality exceeds the OEM part\u003c\/li\u003e\r\n\u003cli\u003eHigher grade of electric components\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eOpposite connector (main harness side) included as we know these are often melted\/corroded\/defective and a major cause for repetitive electrical issues.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eWhy do you need a different voltage regulator for lithium batteries?\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eLithium batteries have different charging requirements than Lead Acid or AGM batteries that can severely affect their lifespan and performance. The key factors in safe and reliable lithium battery charging are the output DC voltage ripple and average output voltage. The RMSTATOR regulator is designed around the optimal parameters for these factors.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eThe ripple effect is all that matters\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eCharging voltage ripple in a Powersports application is the difference between the highest and lowest voltages from the voltage regulator output. By nature, a common shunt style voltage regulator will have a fairly high voltage ripple due to the regulation shunt switches opening and closing frequently. Each on\/off transition will cause some variation in the output voltage, this is unavoidable. Keeping this to a minimum is critical for Lithium batteries, and the RMSTATOR Lithium regulator is designed around this feature.\u003c\/p\u003e\r\n\u003cp\u003eIn a perfect world, a ripple of less than 10% of the output voltage (~1.5V for a typical regulator), would be ideal, however, is not practical for this type of regulator. The RMSTATOR Lithium regulator is able to maintain a less than 4 Volts output ripple, compared to verified test results of our competitors 8 volts. Keep in mind this ripple voltage is only seen via an Oscilloscope sampling the voltage 1000’s of times a second, and is not the same as your average charging voltage as measured by a multimeter.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003ePLEASE NOTE:\u003c\/strong\u003e This voltage regulator is ONLY for lithium batteries \u003cstrong\u003eTHIS IS NOT FOR LEAD ACID BATTERIES\u003c\/strong\u003e. Output Voltage is the key factor in a voltage regulator designed specifically for Lithium batteries. The ideal charging voltage for Lithium batteries is 13.9-14.2VDC. The RMSTATOR regulator has a carefully set output voltage of 14.1VDC (+\/- 0.1VDC). This stable and ideal output voltage carefully keeps a lithium battery in its ideal charging range.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eAll electrical components must be fitted by a qualified technician.\u003c\/li\u003e\n\u003cli\u003eBefore fitting electrical components ensure the root cause of the original failure has been addressed.\u003c\/li\u003e\n\u003cli\u003eThe absence of either of points 1 or 2 above, will void any warranty.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"RMSTATOR","offers":[{"title":"Default Title","offer_id":51674486341914,"sku":"RMS900106857","price":1339.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0939\/2183\/7338\/files\/RMS900106857.jpg?v=1780027215","url":"https:\/\/joshcoppinsmotorcycles.co.nz\/products\/rms900106857","provider":"Josh Coppins Motorcycles","version":"1.0","type":"link"}